This short video outlines the minimal steps required to get a Raspberry Pi board up and running quickly.
This TPS62260LED-338 EVM enables the user to individually control the brightness of three high-brightness LEDs so that the user is able to generate a wide range of colors across the spectrum.
An overview of the BeagleBone Black Board with all the upgrades and how to get started.
The latest advances in MEMS IMUs and how they can help hardware and software engineers shorten development time.
The DRV8840 evaluation module consists of a 5.0 A, single-H-bridge motor driver with a Phase/Enable control interface and a small number of external components that can be used to drive a single brushed DC motor.
BLDC motors provide significant advantages over traditional brushed motors as they typically offer an efficiency increase of 15-20%, among other benefits.
Watch as Steve demonstrates some of the applications for Optek’s LED Lighting Strips, such as under-the-counter lighting, decorative lighting, background lighting, and a few not-so-typical applications.
Detailed hardware requirements and board connections for the X-NUCLEO-IDW01M1 Wi-Fi board based on SPWF01SA serial-to-Wi-Fi modules, to allow expansion of the STM32 Nucleo boards.
Engineers face significant challenges not only in choosing and adopting the most suitable charging technology, inductive or resonance, but also in finding ready solutions to solve complex design issues.
Omron has developed this new, super-sensitive sensor for non-contact thermal measurement that makes full use of proprietary Omron MEMS sensing technology.
The purpose of these development boards is to simplify the evaluation process of these eGaN FETs by including all the critical components on a single board that can be easily connected into any existing converter.
免費電話: 0080-185-4023傳真: +852-3104-0686
版權所有 © 1995-2017, Digi-Key Electronics.保留所有權利。701 Brooks Avenue South,Thief River Falls, MN 56701 USA