ReferenceDesignLibrary

Designs (210)

210 Results - Page 5/21 |< < 3 4 5 6 7 > >|

STEVAL-USBPD45C: 45W, USB Type-C, 90 ~ 264V in

Manufacturer: STMicroelectronics

The STEVAL-USBPD45C 45W AC-DC adapter evaluation board features a USB Type-C connector and functions as a USB Power Delivery provider with a single source port.

View Design

STEVAL-ISC005V1: Stand Alone USB PD Sink Port Controller

Manufacturer: STMicroelectronics

The STEVAL-ISC005V1 evaluation board is a ready-to-use, stand alone USB PD sink based on STUSB4500. It handles the USB PD negotiation with a source to enable one or more charging paths.

View Design

TPS25810EVM-745: USB Type-C DFP Controller and Power Switch with Load Detection

Manufacturer: Texas Instruments

The Texas Instruments TPS25810EVM-745 evaluation module (EVM) helps designers evaluate the performance of the TPS25810 USB Type-C DFP Controller and Power Switch. The EVM contains inputs and outputs for the device as well as many test points and jumpers for easy configuration and evaluation of the TPS25810 features.

View Design

EPC9088: 2A, 0 ~ 60V, 10MHz, Class E Amplifier

Manufacturer: EPC

The EPC9088 is a high efficiency, differential mode Class-E amplifier development board that can operate up to 10 MHz. The purpose of this development board is to simplify the evaluation process of class-E amplifier technology using eGaN ICs.

View Design

SIP32429EVB: 6 ~ 28 Vin, 3.5A Load Switch

Manufacturer: Vishay Siliconix

SIP32429EVB is a load switch that integrates multiple control features that simplify the design and increase the reliability of the circuitry connected to the switch. The SiP32429 is a 56 mΩ switch designed to operate in the 6 V to 28 V range. An internally generated gate drive voltage ensures good RON linearity over the input voltage operating range.

View Design

CDB5480U-Z: Energy Meter, 270VAC Max

Manufacturer: Cirrus Logic Inc.

The CDB5480U is an extensive tool designed to evaluate the functionality and performance of the Cirrus Logic CS5480 power/energy measurement device.

View Design

CDB5484U-Z: 4 Channel Energy Measurement

Manufacturer: Cirrus Logic Inc.

The CDB5484U is an extensive tool designed to evaluate the functionality and performance of Cirrus Logic's CS5484 power/energy measurement device.

View Design

MCP7383XRD-PPM (#1): 500mA, Li-Ion Single Cell

Manufacturer: Microchip Technology

There are two independent circuits on the reference design. First circuit is designed with MCP73832, which allows maximum programmable fast charge current up to 500 mA. The second circuit is designed with MCP73833, which allows maximum programmable fast charge current up to 1A and has a power good indicator and an additional status output. Two preset values of fast charge current are available fo…

View Design

MCP7383XRD-PPM (#2): 1A, Li-Ion Single Cell

Manufacturer: Microchip Technology

There are two independent circuits on the reference design. First circuit is designed with MCP73832, which allows maximum programmable fast charge current up to 500 mA. The second circuit is designed with MCP73833, which allows maximum programmable fast charge current up to 1A and has a power good indicator and an additional status output. Two preset values of fast charge current are available fo…

View Design

MCP1630RD-NMC1: 3 NiMH Cells, 6 ~ 14V in

Manufacturer: Microchip Technology

The MCP1630 Low-Cost NiMH Battery Charger Reference Design demonstrates Microchip’s high-speed Pulse Width Modulator (PWM) (the MCP1630) used in a battery charger application. The MCP1630 is fully assembled and tested for charging three series cell NiMH batteries. When used in conjunction with a microcontroller, the MCP1630 will control the power system duty cycle to provide output voltage or cur…

View Design
210 Results - Page 5/21 |< < 3 4 5 6 7 > >|