Using a security IC and a software library, developers can employ a more efficient approach to mutual authentication required for IoT security.
Developers should consider these low-power processor and board solutions to implement efficient machine learning on IoT devices at the network edge.
Developers can use low-cost boards and specialized LEDs to build a complete greenhouse control system.
Second generation GNSS modules offer faster satellite acquisition and better positional accuracy while becoming easier to design in.
Use switched capacitor filters to lower parts count and get greater accuracy, temperature stability, and reliability compared to passive or active RC filters.
Integrating USB Type-C connectors into designs requires developers pay careful attention to proper connector options and recommended layout guidelines.
The Arduino MKR Vidor 4000 provides a simple and inexpensive way to make use of an FPGA’s real time abilities in embedded system designs.
After choosing between the various wireless cellular interfaces for IoT devices, designers can get LTE-M based designs to market quickly with modules and kits.
Zigbee Light Link eases development of wireless mesh connected, low-power smart lighting.
Using stable hardware and software like the Renesas Synergy Platform, see how to get an IoT application connected to the cloud in 10 minutes.
Machine learning development is going mainstream thanks to accessible software and methods that enable deployment on readily available processors and FPGAs.
How to avoid common issues when working with I2C.
The trend toward more programmable hardware is accelerating. Embedded engineers are now being pushed to think like modern software developers.
Power management chips make it easy to design, configure and supervise multiport PoE+ systems.
Dedicated ICs simplify implementation of authentication mechanisms needed to ensure security in systems ranging from complex IoT devices to simple peripherals.
Power over Ethernet (PoE) is ideal for smart lighting in industrial applications, but designers need to ensure standards compatibility and optimum efficiency.
Developers can create an IoT gateway simply by loading free firmware from Mozilla into a Raspberry Pi.
Industry 4.0 offers increased safety, reliability, and productivity. However, many challenges arise when edge devices are connected to TSN enabled networks.
The Amazon FreeRTOS bootloader solution allows IoT developers to easily update their firmware over the air (OTA).
The Otii Arc from Qoitech AB makes it easy to analyze an embedded IoT device’s energy profile so it can be better optimized for longer battery life.
時常檢查您的收件匣，取得 Digi-Key 的最新消息與通知！