IoT Air Quality Monitoring

Air quality can have an adverse impact on people’s health, so monitoring of air quality has become increasingly important and commonplace. Regulatory requirements and technology advancements are also driving increased interest in and the use of monitoring.

Cypress and Sensirion collaborated on an IoT air quality monitoring example project that integrates a Cypress PSoC 6 processor with Sensirion sensors to push sensor data to a cloud dashboard.

Project Background

The project uses a CY8CKIT-062-WIFI-BT PSoC 6 evaluation board to query Sensirion sensors over I2C and connect to the cloud. Sensirion’s SGP, SPS, and SHT sensors are used to measure VOC and CO2 equivalent gas concentrations, particulate matter concentrations, temperature, and humidity. ThingsBoard Open-Source IoT Platform is used for visualization of sensor data on a dashboard. All project details, instructions and software are documented in the IoT air quality monitoring example project downloadable from GitHub. The demo software provided with the project should be compatible with most Cypress WICED SDK devices, but the configuration code may need to be adjusted to match the hardware.

Availability at Digi-Key Electronics

ARDUINO SHIELD SGP30_SHTC1

Related Product Highlights

Next-Gen Smart Air Quality Monitoring

關於作者

Image of Scott Raeker

Scott Raeker 是 Digi-Key Electronics 的首席應用工程師,自 2006 年起加入公司,主要負責協助無線領域的客戶。他在電子產業累積超過 35 年的經驗,擁有明尼蘇達大學的電子工程學位。在空閒時,Scott 喜歡整修他的鄉村農舍。

More posts by Scott Raeker